What does 3D printing cost? The factors behind the price

Why two parts of the same size cost different amounts, and which levers actually move something for you as a designer.

6 November 20266 min ReadContract manufacturing
Costing a part in 3D printing contract manufacturing

There is no single figure in answer to what a printed part costs – there is a calculation. Knowing it lets you design more cheaply, often without changing anything about the function. Our cost calculator gives you a first indication in two minutes; this article explains what happens inside it.

The four factors

Material volume. What actually ends up as material in the part, including support structures. It is not the envelope geometry that counts but the volume printed.

Print time. The machine is occupied for as long as it is printing. The time depends on the volume, the layer height and how far the head has to travel. Output rate comes in here: with plastics our pellet extruders manage up to 500 grams per hour, while a filament extruder is well below that.

Material. There is a multiple between a standard plastic and a fibre-reinforced compound. Pellets are generally cheaper than filament, because the processing step into a strand is not needed.

Post-processing. Blasting, painting, threaded inserts, reaming fits – every step is manual work and shows up accordingly.

Where you can genuinely save

  • Reduce the infill. The single most effective measure. A part rarely has to be solid; a low infill saves material and time at the same time.
  • Avoid support structures. Every support is material that gets thrown away, plus time to remove it. Overhangs can often be avoided by rotating the part or adding a chamfer.
  • Specify tight tolerances only where they are needed. See tolerances and surface finish.
  • Order several parts together. A full build plate is more economical than three half-full ones.

What does not weigh much

Two widespread assumptions are wrong. Geometric complexity costs next to nothing in 3D printing – an organically grown shape is no more expensive than a cuboid of the same volume. And one-offs are not disproportionately expensive, because there are no set-up costs for a tool. That is precisely the structural advantage over injection moulding.

When a tool starts to pay off

The threshold is around 10,000 parts. Below that, printing is usually cheaper; above it, a simple aluminium tool or vacuum casting. The full calculation is under 3D printing vs. injection moulding.

From indicative price to quotation

The calculator handles STL and STEP and returns an indicative figure. It becomes binding after the technical review – at which point we look at wall thicknesses, overhangs and fits, and get in touch if a change would make the part better or cheaper. We reply to enquiries within 24 hours, and we will sign a non-disclosure agreement beforehand on request.