Rapid prototyping explained

From display model to a prototype you can load: what the term means today and what matters in practice.

5 November 20266 min ReadFundamentals
Functional prototype from pellet-based 3D printing

The term dates from the late eighties, when holding a part in your hand within days rather than weeks was still a sensation. Today that speed is taken for granted, and the interesting question has shifted: not how fast do I get a model, but how much does it tell me about the later production part.

Three stages that often get confused

  • Display model. Shows shape and proportion. Good for design reviews and sign-offs, says nothing about function.
  • Functional prototype. Can be installed, loaded and measured. Only worthwhile if the material comes close to the later one.
  • Pre-production part. Matches the production part in material and geometry, just not in the manufacturing process.

Most disappointments arise because stage one was delivered and stage two was expected.

Why the material makes the difference

This is where pellet-based extrusion really pays off. Our extruder processes injection-moulding pellets directly – the same PA, PP or PPS that will later come out of the tool. A part printed this way behaves under load much like the production part, not like a substitute material that happens to look similar.

Added to that are fibre-reinforced compounds such as PPS-CF and PA-CF, and regrind. So if you intend to injection-mould in the end, you check the geometry in the right material. Why pellets have the advantage over filament here is covered in filament extruder vs. pellet extruder.

Iterations are the real value

A prototype rarely answers everything first time. The value lies in the second and third round – and that is exactly where 3D printing has no competition: there are no tooling costs to make a change expensive. A revised file costs material and print time, and nothing else.

In practice that means: have an unfinished part printed early and learn from it, rather than optimising in CAD for weeks. We reply to enquiries within 24 hours.

Which process for what

For functional prototypes in the production material, FGF is the first choice. For fine detail and smooth surfaces, SLA through our partner, with tolerances around ± 0.02 millimetres. For anything that has to withstand temperatures or wear at which plastics fail, technical ceramics. The comparison is set out in the process comparison.

And after that?

Once the geometry is right, nothing has to be changed over: the same machine, the same material, just more parts on the build plate. A single piece is possible, around 1,000 parts per order makes sense, and spread over a year considerably more.

From around 10,000 parts the sums tip in favour of a tool – see 3D printing vs. injection moulding. Everything else about the offering is under rapid prototyping in the production material.