Anyone building additive manufacturing into an industrial supply chain eventually runs into the question of standards. It rarely comes from the design office; it usually comes from quality assurance or purchasing, and in essence it is: to which standard was this part made?
This article places the body of standards and sets out what it does and does not deliver. It describes the state of standardisation in general, not a testing or certification offering.
ISO/ASTM 52900: the foundation
ISO/ASTM 52900 is the joint base standard from ISO and ASTM for the terminology of additive manufacturing, and the starting point of a whole series of standards. The base standard itself deals above all with terms and classification – which sounds unspectacular and is nevertheless the most important part.
It defines the seven process categories of additive manufacturing and places the market terms within them. The pellet printing we run belongs to material extrusion – the same category as filament printing, only with a different material feed. What distinguishes them in practice is described in our comparison of filament and pellet extruders.
The benefit of that classification is greater than it looks: it makes quotations comparable. When an enquiry says “3D printing”, that can mean seven fundamentally different process categories which differ considerably in strength, surface and cost. Which process is good for what is set out in our process comparison.
What the series covers beyond that
Around the base standard, a body of standards has grown up that covers further areas:
- Terms and process classification as a common language.
- Data formats and data exchange for the process chain from CAD to machine.
- Design guidelines setting out design rules for additive processes.
- Test methods and test specimens, so that material data are determined comparably.
- Qualification of processes and machines, above all for regulated industries.
- Material-specific standards, currently densest for metals.
Where gaps remain in practice
This is the part that is usually missing from overviews of standards.
A standard for the process is no commitment about the part. That a process is described normatively says nothing about the strength of your part. That depends on material, parameters, orientation in the build volume and post-processing.
Anisotropy remains an issue. Additively manufactured parts are as a rule direction-dependent in what they can carry – across the layers they usually carry less than along them. How much depends on the process. No standard removes that; it only makes it describable.
Polymers and ceramics are less densely standardised than metals. Anyone looking for a material standard for a ceramic compound will find less than in the metals field. What is binding remains the datasheet for the specific compound.
Reproducibility is a question of process. For a production run, what counts is not whether the first part was good but whether the hundredth is the same. That is settled through process control, monitoring and documentation – not through a standard quoted in a quotation. How hard that requirement becomes in regulated industries is shown by additive manufacturing in aerospace.
What to ask about instead
If you are buying additive parts, these questions deliver more than asking for a standard number:
| Question | Why it carries |
|---|---|
| Which process exactly, which material? | “3D printing” is not a specification; the compound is |
| Is there a datasheet for the compound? | properties are compound-specific, not process-specific |
| In which orientation will it be printed? | determines the direction in which the part carries |
| Which tolerances are committed to? | distinguishes a sample part from a production part |
| What gets documented? | decides whether a production run can be traced |
| Will the compound stay available over the product life? | with long-lived products, often the hardest obstacle |
Which values are realistic in pellet printing is collected in tolerances and surface finish.
How we handle it
We tell you the process, the compound and the orientation, and we supply the datasheet for the material. Where an application requires qualification or formal evidence beyond that, we settle it part by part before anything is made – not through a blanket commitment.
If your approval requires a particular standard or a particular piece of evidence, tell us in the enquiry. We will then say in advance what we can deliver and what we cannot.