Hardly any industry is named more often in connection with additive manufacturing than aerospace. There is a sound reason for that: nowhere is saved weight worth as much, nowhere are quantities as small and parts as complex. That is exactly where additive manufacturing plays to its strengths. Most clearly in lightweight design: lattice structures cannot be made conventionally at all.
At the same time it is the industry in which a technically convincing part most often fails on something other than its properties. This article describes both sides – without the usual promises.
Why ceramics are of interest here
For hot, light and dimensionally stable parts, technical ceramics are an obvious material. Three properties count above all.
- Low thermal expansion. Many technical ceramics expand less under heat than metal – how much depends on the material. A part that gets hot in service and still has to hold its geometry is easier to design in ceramics.
- Dimensional stability in service. Faces that seal, guide or carry change less over temperature. That reduces tolerance chains that would otherwise drift with temperature.
- Temperature resistance at low density. Ceramics withstand temperatures at which metals creep, and are lighter than steel in doing so. For the highest temperatures, silicon carbide and silicon nitride come into consideration; we produce them on request.
On top of that comes the point that makes additive manufacturing worthwhile in this industry in the first place: near-net-shape production. A ceramic part that has to be ground costs time on a machine with diamond tooling. If the contour is created during printing instead, while the material is still machinable, geometries become economical that conventionally could only be made at great effort – near-net-shape cavities, for instance, that no tool can reach.
The obstacles that actually decide
This is where it gets uncomfortable. The requirements on which projects in this industry fail usually have nothing to do with the material.
Tolerances
The specifications are tight, and they apply not to a sample part but to every part. In ceramic printing that is set against a process in which the part shrinks during sintering. By how much depends on the compound and the geometry. If you need a closely toleranced face, put it into the green part and machine it there – with the shrinkage allowance in the design. What is realistic in pellet printing we have described separately under tolerances and surface finish.
Availability over the product life
This is the harder obstacle. Aerospace requires an approved part to remain available unchanged over the life of the system – over periods measured in decades, not in product generations. For a supplier that means: the same compound, the same process, the same properties – demonstrable over the entire period.
Additive processes fail on that more often than on strength or temperature. Anyone who blends materials, optimises process parameters and develops machines further has to be able to freeze exactly that as soon as a part is approved. That is an organisational requirement, not a technical one.
Evidence and documentation
An approval requires reproducible processes and demonstrable properties, not one successful part. Depending on the application, material qualification, process monitoring and complete documentation are added. That is feasible case by case, but it is project work with its own cost – and it starts before the first part, not after it. What the ISO/ASTM 52900 series of standards covers and what it does not, we have described separately.
What the route is nevertheless open for
Between “approved flight part” and “not feasible” lies the range in which additive manufacturing actually works in this industry today:
- Tooling and fixtures for assembly and testing. Small quantities, high complexity, no flight approval needed.
- Prototypes and functional samples, to check a geometry before it goes into qualified production.
- Test and experimental rigs, where temperature resistance and dimensional stability are required but no approval is.
- Spare parts for ground support equipment and production machinery, where lead times would otherwise mean standstill.
That is less spectacular than an engine component, but it is the range in which the benefit arises today.
How to approach the subject
If you come from aerospace, tell us three things first: which tolerances the part has to hold, over what period it has to remain available, and which evidence your approval requires. After that we talk about material and geometry.
That order is unfamiliar but it saves months. A part we can produce technically, but whose availability requirement we cannot commit to, is no help to you.